Blue Moon...

No, not in Fairbanks, but for someone unlucky, or maybe a little stupid, it was a very blue moon:

A German man mooning at railway staff in a departing train got his trousers caught in a carriage door and ended up being dragged half naked along the platform, out of the station and onto the tracks.

The 22-year-old journalism student shoved his backside against the window of a low-slung double-decker train when staff forced him off in Lauenbrueck for traveling without a ticket, a spokesman for police in the northern city of Bremen said.

"It's a miracle he wasn't badly hurt," the spokesman said on Monday. "This sort of thing can end up killing you."

Instead, dangling by his trousers, the man got pulled along for about 200 meters, all the while managing to keep his legs away from the wheels of the train.

The ordeal ended when a passenger pulled the emergency brake. Rescues services were called in, causing rail services between Bremen and Hamburg to be suspended for over an hour, delaying 23 trains.

The man -- unharmed except for cuts and bruises -- now faces charges of dangerous interference in rail transport, insulting the train staff, and may face sizeable a compensation claim for the delays he caused, police said.

"He was full of remorse when I talked to him," the spokesman said. "And he advised others not to try the same thing."

http://www.reuters.com/article/oddlyEnoughNews/idUSTRE59B4FM20091012

Timber moves...

Finally got around to moving the timbers (Timber 2...Sept 9). First had to weld up a pair of bucket forks to pick up the long timber to get it down to garage. Then was able to roll it into place on some snow machine dollies. Made some slings out of webbing and picked it up off of the floor with a couple of come-alongs attached to the wall. Then got the vertical timbers into place with a handyman jack. Had to do some last minute cutting, as one timber was a little long, but everything went remarkably well and the handyman only bit my hand once. I meant to take a series of photos as the beams were raised, but with the euphoria of the erection, forgot.

The weather has been really mild, in the fifties this past week. Maybe I'll have time to finish a few more summer projects. It's always a little amazing how much work you can get done when you know it soon will be snowing and possibly below zero in the next few weeks.

Last trip on the Delta...

Went down to the Delta River to do some survey work with my friend Mike. I go there several times a year (Flight time... April 3). The weather was awful, wet, sloppy snow on the way down, the wind blowing like crazy, and lots of cars in the ditches. As Mike always says: "It doesn't get any better than this."

After I got there and met Mike , we launched the boat OK, as yet there was no ice in the river, but then the steering was frozen up. In trying to free it, the gears or whatever broke. So we had to drive back to Glennallen, where Mike works, and get a different boat. By the time we got back, it was getting dark, so we spent the night at a small cabin nearby. The next morning was clear and cold, about 20 F, and it made for a chilly boat ride. But we were able to get to both survey sites without too much trouble and finish the work in spite of the bad weather.

This will probably be my last survey trip on the Delta. Mike had been looking to move on for a while and he will soon be leaving Alaska to start his new job. We worked together for over ten years and I never found any one who worked as hard or was easier to get along with than Mike. My wife thought we were like twin brothers with different mothers.

Mojo...

Here's a new blog I've been following, http://they-call-me-mojo.blogspot.com/. One thing they do, besides make you laugh, is think. Here's their latest quote: Do not worry if others do not understand you. Instead worry if you do not understand others. -----Confucius

I think whoever writes this is pretty funny.

Timber 2...

Back in June I got started again on last year's timber framing project (Timber... June 21). It's almost finished now and looks like it's going to turn out fine. Always some concern starting a new project, especially when you haven't done anything like it (in this case, making timbers and notches) for over twenty years. After the picture was taken, I marked and cut the final notches, then gave the timbers a light coat of varnish to seal the wood. Now all we have to do is get the framework upright inside the garage...

Bowlin' up...

After our old cat died, we went to one of the local cat recycling shelters and picked out a 2 year old Maine coon cat. They said he was called Mittens, but we thought that rather unmanly for a big, tough looking fellow, so we tried to come up with a new name. Since he tended to sleep a lot, often in odd places, my wife thought we should call him Ruty, cause "he's about as lively as a rutabaga." He does have his rare moments of activity, when he races around the house and literally climbs the walls, something he can easily do in a log cabin, but then he soon finds a chair, or sometimes a bowl, to sleep in. Not the big, bad coon cat we expected, but just a friendly, mellow fellow.

Breakfast of champions...

Commented earlier (Readin’ the funnies…Mar 18) about the online site for the local paper and how some people use the comment section to bash Obama, the greenies, libruls, or whoever they don’t agree with that day. It used to seem kind of funny, but now it’s just down right stupid and nasty. Here’s a comment that followed a columnist who had linked to some articles that made fun of our recently resigned governor.

http://newsminer.com/weblogs/dermot-cole/2009/jul/28/william-shatner-reads-sarah-palin/

“But Cole, know this; With all the negative attitude that you showed to our Fine Ex. Gov. when your time comes and they Roll you in a hole; what I'll do to that hole (After a good meal) won't pass for flowers!”

“I would write more, but I got to get back to My Reading on "Why liberal-women have mustache's. Anyone here ever try to have a conversation with a liberal-woman that has just the right amount of hair on her lip to be called a "mustache" and NOT Stare at it?”

He must have had a double bowl of stupid that morning.

Dozin' off...

Spent the last few weeks driving a dozer out on Nome Creek off of the Steese Hwy. The BLM is doing a reclamation project on the old dredge tailing piles that are left over from mining in the 1920's and 30's. Their aim is to move the piles away from the creek to reduce the erosion and sedimentation and flatten the piles to promote revegetation. This should improve the fisheries, since there's a small run of salmon near the mouth of Nome Creek, and create moose browse. Besides all that, it's just a lot of fun to get out and drive a new piece of heavy metal every year, especially one that's nearly as big as the garage.

Road Trip...

After flying to Chicago to attend our niece's wedding, we stopped in Portland on the way back. Rented a car and drove down to near Coos Bay where our friends Larry and Jeanne live. The drive down the coast was pretty spectacular and, unlike Alaska, the roads were in great shape. Larry and Jeanne love the area and took us on a long hike along the coast to see the sights. When we left, we went the long way back to Portland stopping at Crater Lake and then through the high desert area near Bend. If it weren't for the ignorant drivers, it would be a really great road trip.

Take a seat...

I got the old Moto Guzzi in '89 from a friend who wanted to buy a Harley. It is a 1975 850T with about 10K miles. Ran great but had some oil leaks and rust issues. Rebuilt the leaky front master cylinder, replaced the tranny seals, and repainted it. The seat had some rips but so what, we'll deal with it later. Well I finally decided to get it fixed this summer since the foam was really starting to show. After sending out many emails to try to find a seat cover, I called a local outfit, Fairbanks Upholstery, and they said sure, bring it in. After they removed the seat cover and foam, the rust on the top of the seat pan was incredible. So had to take it home, sandblast and paint it, then take it back the next day. And now I have this great seat, looks brand new, and it only took twenty years to get'er done.

Timber...

Doing some work on the cabin addition and decided to timber frame it. That led to trying to make the timbers myself. The old Partner chainsaw wasn't really up to the task, so had to get a new chainsaw. Finally got going on it again and have the main long timber almost done. Lots of work, but it'll be pretty satisfying when it's all done.

Rollin' on a river...

Floated the Gulkana River with my friend Mike. He had some survey work to do there and then we'd have time to fish and enjoy the river afterwards. What I didn't realize was the size and extent of the white water through the canyon rapids and for several miles downstream. Pretty intimidating when we looked at it from the portage and it was really wild when we ran it. Mike did a great job rowing the raft and we never came close to hitting any rocks. It made for some good stories and lots of comments for the rest of the float.